The Belle Group FAQ's (Frequently Asked Questions)

#Q1) Why will my Honda (GX120) Mini 150 not start?

#Q2) Where can I find my serial number?

#Q3) How do I arrange to send my Belle Product back for a Service repair?

#Q4) Where can I purchase spare parts from?

#Q5) Do the mixer gearboxes come already filled with oil? 

#Q6) What type and grade of oil is used in the mixer gearboxes?

#Q7) How do I remove my Mini 150 Drum?

#Q8) Why won’t my Mini 150 switch hold in?

#Q9) What oil goes in the Mini 150 Engine?

#Q10) Why will my PCX Honda plate compactor not start?

#Q11) What oil should I use in my PCX Plate compactor?

#Q12) What size transformer should I use on my 110v BC350 saw?

#Q13) How long is the warranty on spare parts? 

 

 

 

   


  Q1) Why will my Honda (GX120) Mini 150 not start?

Your Honda Mixer may not start due to the oil level in your engine, check your engines oil level in accordance with the below.

 

Click Play below, to see how to fill your Honda Mini 150 with the correct oil level.

 

 


 Q2) Where can I find my serial number?    

All the machine serial numbers can be found on a black label or a metal plate located on the machine.


Q3) How do I arrange to send my Belle Product back for a Service repair?

 Please contact our Service department on the below for further assistance:-

Tel: 01298 84606

Fax: 01298 84073

Email: warranty@belle-group.co.uk


Q4) Where can I purchase spare parts from? 

Belle Group World Parts Centre,

Tel: 01298 84606

Fax: 01298 84722

Email: parts.centre@belle-group.co.uk

Web: www.Altrad-Belle247.com


Q5) Do the mixer gearboxes come already filled with oil?

Yes all the mixer range comes complete with oil already installed.


Q6) What type and grade of oil is used in the mixer gearboxes?

Mini 150 Up to August 2006 - EP90 gear oil

Mini 150 From August 2006 - Silkgear 220 synthetic oil

Maxi - Total transmission 75w 90 synthetic oil

Premier - Total transmission 75w 90 synthetic oil


Q7) How do I remove my Mini 150 Drum?

The Mini 150 mixer drum will spin off anticlockwise as you look into the drum.

Mini 150 Drum Removal


Q8) Why won’t my Mini 150 switch hold in?

This could be related to two things: - Incorrect lead length or incorrect volt supply.

230v Mini 150 – Your lead length should be no more than 30 Meters long and 2.5 mm wire size.

110v Mini 150 – Your lead length should be no more than 30 Meters long and 2.5 mm wire size with a transformer size of 2.2 KVA or more.

Warning: - DO NOT use an extension cable between the transformer and the mains power supply


Q9) What oil goes in the Mini 150 Engine?

The grade of oil should be 10W 30 mineral oil.


Q10) Why will my PCX Honda plate compactor not start?

This could be related to two things: -

Fuel - Incorrect, insufficient or contaminated fuel has been used. Unleaded fuel is the recommend fuel to be used in this model of machine.

Low Oil level - Fill until the oil is at the marked level on the dipstick, If your plate still fails to start then check the oil level is high enough, as the oil alert feature on the Honda engines are quite precise.


Q11) What oil should I use in my PCX Plate compactor?

Hatz Engine Oil: - 10W 30 mineral oil

Honda Engine Oil: -10W 30 mineral oil

Vibrator Unit: - 32 grade mineral oil (Total Preslia 32)


Q12) What size transformer should I use on my 110v BC350 saw?

The transformer size should be 6 KVA or more.


Q13) How long is the warranty on spare parts?    

Three months from date of purchase from Belle. 

 

 


 

Here at the Belle Group we endeavor to answer all of your questions, however if our FAQ section has not answered your question.

Please contact us on the below for further assistance.

Tel: 01298 84606

Fax: 01298 84722

Email: parts.centre@belle-group.co.uk

Click Here to submit an Email Enquiry